Inflatable 3.3m Diameter Pneumatic Rubber Fender , Ship Floating
Fender For Protection
inflatable 3.3m diameter pneumatic rubber fender , ship floating
fender for protection
Pneumatic rubber fender is the advanced anti-collision device for
marine application in the world. Pneumatic Rubber Fender also known
as floating fender or Yokohama type rubber fender, it is often
installed on the terminal or ship, which aims to absorb or reduce
the collision energy between ship to ship and ship to dock. This
kind of product can protect the ship or dock from the damage of
collision. With inner compressed air, it can float on the water and
widely used as protecting medium equipment. Size : D0.5 m x L1.0 m
~ D 3.3 x L6.5m. "XINCHENG" Pneumatic rubber fenders are produced
in strict accordance with the ISO17357-2002 and GB/T 2002-2002
international quality standard, our products have exported to all
over the world.
Compared to traditional solid rubber fender, pneumatic has
following advantages
1. Big energy/ impact absorption capacity, small reaction force to
ships
2. Easy and fast installation
3. Higher elasticity. It doesn’t get deformation under compression
4. Light weight
5. Economical and practical
a. Outer Rubber
Cover outside on the ball of rubber layer, which is used to protect
skeleton material and inner rubber ball from damage of external
force, the main features: high strength, wear resistance, ageing
resistance and tear resistance.
b. Synthetic cord reinforced rubber layer
Reinforced cord rubber layer is composed of winding Synthetic cord
layer, It is mainly used for maintain the internal air pressure,
which has good elasticity, no deformation and high power etc.
c. Inner Rubber
On the ball inside the rubber layer, which is used to prevent air
leakage and control the ball pressure.
d. End Flange
The metal parts at both ends of fender, which can be fitted with
charging valve and safetyvalve.
Normal size Diameter x Length | Initial Internal pressure 0.05MPa | Initial Internal pressure 0.08MPa |
Guaranteed Energy Absorption(GEA)
| Reaction Force At GEA(RF) | Hull Pressure At GEA(PR) |
Guaranteed Energy Absorption(GEA)
| Reaction Force At GEA(RF) | Hull Pressure At GEA(PR) |
| mm x mm | | KN | Kpa | | Kpa | Kpa |
500x1000 | 6 | 64 | 132 | 8 | 83 | 174 |
600x1000 | 8 | 74 | 126 | 11 | 96 | 166 |
700x1500 | 17 | 137 | 135 | 24 | 178 | 178 |
1000x1500 | 32 | 182 | 122 | 44 | 235 | 161 |
1000x2000 | 45 | 257 | 132 | 63 | 335 | 174 |
1200x2000 | 63 | 297 | 126 | 86 | 386 | 166 |
1350x2500 | 102 | 427 | 130 | 140 | 554 | 170 |
1500x3000 | 153 | 579 | 132 | 211 | 751 | 175 |
1700x3000 | 191 | 639 | 128 | 263 | 830 | 168 |
2000x3500 | 308 | 875 | 128 | 424 | 1138 | 168 |
2500x4000 | 663 | 1381 | 137 | 925 | 1815 | 180 |
2500x5500 | 943 | 2019 | 148 | 1317 | 2653 | 195 |
3000x5000 | 965 | 1815 | 148 | 1341 | 2359 | 198 |
3300x4500 | 1175 | 1884 | 130 | 1640 | 2476 | 171 |
3300x6500 | 1814 | 3015 | 146 | 2532 | 3961 | 191 |
NOTE:1.REACTION FORCE AND ENERGY ABSORPTION TOLERANCE IS ±10% 2.WEIGHT TOLERANCE IS ±10% 3.SPECIAL SIZE CAN BE PRODUCED FOLLOW CUSTOMER'S NEEDS |
Tyre-chain Protective Jacket Type Pneumatic Fender
Yokohama Pneumatic Fenders
What is a pneumatic fender?
What is a Yokohama fender?
How much does a Yokohama fender weight?
What are marine fenders?
Why is it called Yokohama fender?
What are ship fenders?
